cutting Speed: 4 seconds per cut (Depends on roll material & operator)
bottom roll guider.
Suitable for: non-woven roll dia 250mm only.
Cutting length: 1, 1.25, 1.5 and 1.75 inches. (Fix racks are inbuilt)
Roll core ID: 39 mm. (As per your requirement)
Loading capacity: 1 roll of 200 diameter x 1120 mm (48”)
Total roll holding shaft: 1 no.
Required labor: 1 Operator
Required power for machine: 2.0 HP 1 PHASE / 3 phase
Machine weight: 325 Kg.
Machine Size: 80X 36X 59 (L x B x H)
Electric control panel: with Push button and speed regulator.
Operator have to insert roll on holding shaft and put at machine center.
Operator have to push the button to start the machine.
Machine hold the Roll and rotate it; & same time fix 1 cutter of 9 inches move forward to cut the roll by operator.
After each cutting operator has to moves cutter forward for second cut.
Operator have to collect cut rolls with holding shaft and place new roll at there.
Easy to operate & low maintenance.
Warranty: 9 months in Drive & Main motor.
Delivery time 25 days after getting 60% advance.
Free: Training of machine operating and general maintenance at our Surat factory.
Free: 1 tool set
Telephonic service free for life time (Monday to Saturday 9 AM to 6 PM, Sunday Weekly off) service will be discontinue if you use other company’s spare in this machine.
Spare available any time against full payment.
More Products
Automatic Bulb Holder Parts Assembly Machine
Incense Spraying machine 8 Inch & 9 Inch (Linear type)
Automatic Switch assembly machine by Soham India. (Linier type)
